سنتز نانوکامپوزیت بر پایه زئولیت طبیعی به روش هیدروترمال و کاربرد آن در فرآیند اکسیداسیون کاتالیستی بنزوتیوفن به‌منظور حذف گوگرد

نوع مقاله : مقاله علمی پژوهشی

نویسندگان

1 سمنان، دانشگاه سمنان، دانشکده شیمی

2 سمنان، دانشکده شیمی، دانشگاه سمنان

3 سمنان، دانشگاه سمنان، دانشکده علوم و فناوری های نوین، گروه نانو فناوری

10.22075/chem.2025.38474.2380

چکیده

در این پژوهش، نانوکامپوزیت Mn₂V₂O7/Fe₀.₁₁V₂O₅.₁₆/zeolite به‌روش هیدروترمال سنتز شد. به‌منظور بهبود خواص سطحی و افزایش قابلیت جذب، زئولیت با سورفکتانت کاتیونی ستیل‌تری‌متیل‌آمونیوم برومید (CTAB)اصلاح شد. این کامپوزیت با نسبت 1:1 کاتالیست (MnFe2O7/Fe₀.₁₁V₂O₅.₁₆) بر پایه زئولیت اصلاح شده سنتز گردید. نانوکامپوزیت نهایی با استفاده از آزمون‌های FTIR، XRD و SEM مورد شناسایی قرار گرفت و نتایج نشان داد که فازهای Mn₂V₂O7و Fe₀.₁₁V₂O₅.₁₆ به‌صورت یکنواخت و موفقیت‌آمیز روی سطح زئولیت اصلاح‌شده قرار گرفته‌اند. از این نانوکامپوزیت به‌عنوان کاتالیست در فرآیند اکسیداسیون بنزوتیوفن به‌منظور حذف گوگرد در سوخت مدل استفاده شد که تحت شرایط بهینه، راندمان حذف گوگرد به 53٪ رسید. به‌منظور بررسی مکانیسم واکنش، داده‌های تجربی با مدل‌های سینتیکی مرتبه صفر، اول و دوم برازش شدند. نتایج نشان داد که واکنش از مدل سینتیکی مرتبه دوم تبعیت می‌کند و ضریب همبستگی بسیار بالای 9385/0= R² به‌دست آمد که نشان‌دهنده وابستگی مستقیم سرعت واکنش به غلظت بنزوتیوفن است. این یافته‌ها نشان می‌دهد که نانوکامپوزیت Mn₂V₂O7/Fe₀.₁₁V₂O₅.₁₆ با زئولیت اصلاح‌شده به وسیله CTAB می‌تواند به‌عنوان یک ماده مؤثر در حذف گوگرد از سوخت‌ها مورد استفاده قرار گیرد

کلیدواژه‌ها

موضوعات


عنوان مقاله [English]

Facile Hydrothermal Fabrication of Nanocomposite based on natural zeolite and its Application in Catalytic Oxidative Desulfurization of Benzothiophene

نویسندگان [English]

  • Shima H. Khabbaz 1
  • Ahmad Bagheri 2
  • Mehdi Mousavi-Kamazani 3
1 Department of Chemistry, Semnan University, P.O. Box 35131-19111, Semnan, Iran
2 Department of Chemistry, Semnan University, P.O. Box 35131-19111, Semnan, Iran
3 Department of Nanotechnology, Faculty of New Sciences and Technologies, Semnan University, Semnan, Iran
چکیده [English]

In this study, a Mn₂V₂O7/Fe₀.₁₁V₂O₅.₁₆/zeolite nanocomposite was successfully synthesized via a hydrothermal method. The zeolite support was surface-modified with cetyltrimethylammonium bromide (CTAB) as cationic surfactant to enhance its adsorption properties and dispersion behavior. This composite was synthesized with a 1:1 ratio catalyst (MnFe2O7/Fe₀.₁₁V₂O₅.₁₆) based on modified zeolite. The final nanocomposite was characterized using FTIR, XRD, and SEM analyses, which confirmed the successful formation of a well-integrated and uniformly distributed Mn₂V₂O7 and Fe₀.₁₁V₂O₅.₁₆ phases on the modified zeolite surface. The synthesized nanocomposite was then applied as a catalyst for the oxidative desulfurization of benzothiophene in model fuel, achieving a sulfur removal efficiency of 53% under optimized conditions. To evaluate the reaction mechanism, kinetic studies were performed by fitting the experimental data to zero-, first-, and second-order models. The results indicated that the desulfurization reaction followed a first-order kinetic model with an excellent correlation coefficient (R² = 0.9385), suggesting that the reaction rate is directly proportional to the benzothiophene concentration. These findings demonstrate that the CTAB-modified Mn₂V₂O7/Fe₀.₁₁V₂O₅.₁₆/zeolite nanocomposite is a promising material for effective fuel desulfurization.

کلیدواژه‌ها [English]

  • Nanocomposite
  • Hydrothermal synthesis
  • Kinetic modelling
  • Catalytic oxidative desulfurization
  • benzothiophene
  • desulfurization